Moneris Total Commerce - Getting Started with the HP Hardware Bundle

This article explains how to set up the HP hardware for your Moneris Total Commerce solution, including the Moneris Go terminal and Wix POS equipment.

Procedure

Product

Moneris Go (a920)

Overview

This article explains how to set up the HP hardware for your Moneris Total Commerce solution, including the Moneris Go (A920) terminal and HP POS equipment.

 

 

There is a specific order in which to set up your equipment. You need to perform the following tasks in the order presented here to make your setup experience as seamless as possible:
 
  1. Review the information in the Before you get started section below.
  2. Unbox the equipment.
  3. Connect the hardware to the HP tablet.
  4. Power on  the HP tablet and connect it to your business Wi-Fi network.
  5. Download and install any software updates for the tablet.
  6. Log in to Wix POS on the tablet and perform initial configuration.
  7. Set up the Moneris Go terminal, set it into Cloud mode, and charge it.
  8. Pair the Moneris Go terminal with the tablet.

Moneris Total Commerce - Before You Get Started

Moneris Total Commerce - HP and Moneris Hardware Setup

Moneris Total Commerce - Set up the HP POS Tablet

Moneris Total Commerce - Next Steps

Did You Find This Article Helpful?